Mikrotik CAP AC XL Wireless Access Point - RBcAPGi-5acD2nD-XL

The new cAP XL ac design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow for an increased coverage area of up to 100%, compared to the previous cAP models.

The dual-band, dual-chain 2.4 and 5 GHz wireless radios provide improved 360 degree coverage, no need to worry about placement. Mounting the RBcAPGi-5acD2nD-XL on the ceiling eliminates most signal absorption problems, such as the signal being blocked by large TV sets, metal cubicle walls in open space offices, etc.

Even though the radio supports repeater mode, the two Gigabit Ethernet ports offer the ability to extend your network with cables, even if PoE power is required on the second device: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.

Product Specifications:

Product code     RBcAPGi-5acD2nD-XL

Architecture         ARM 32bit

CPU         IPQ-4018

CPU core count         4

CPU nominal frequency         716 MHz

RouterOS license         4

Operating System         RouterOS

Size of RAM         128 MB

Storage size         16 MB

Storage type         FLASH

MTBF         Approximately 100'000 hours at 25C

Tested ambient temperature         -40°C to 70°C

                                            Wireless capabilities

Wireless 2.4 GHz Max data rate         300 Mbit/s

Wireless 2.4 GHz number of chains         2

Wireless 2.4 GHz standards         802.11b/g/n

Antenna gain dBi for 2.4 GHz         6

Wireless 2.4 GHz chip model         IPQ-4018

Wireless 2.4 GHz generation         Wi-Fi 4

Wireless 5 GHz Max data rate         867 Mbit/s

Wireless 5 GHz number of chains         2

Wireless 5 GHz standards         802.11a/n/ac

Antenna gain dBi for 5 GHz         5.5

Wireless 5 GHz chip model         IPQ-4018

Wireless 5 GHz generation         Wi-Fi 5

AC speed         AC1200

                                                    Ethernet

10/100/1000 Ethernet ports         2

Number of 1G Ethernet ports with PoE-out         1

                                                     Powering

Number of DC inputs         1 (PoE-IN)

Max power consumption         24 W

Max power consumption without attachments         11 W

FAN count         Passive

PoE in         802.3af/at

PoE in input Voltage         18-57 V

                                                    PoE-out

PoE-out ports         Ether2

PoE out             Passive PoE up to 57V

Max out per port output (input 18-30 V)         500 mA

Max out per port output (input 30-57 V)         330 mA

Max total out (A)         500 mA